What to Look for When Shopping for a Portable Air Compressor

0 35

The first thing you should do is write each of the tools that will work together. Then you will need to use the compressed air consumption frequency and the amount of compressed air equipment from the compressor storage tank. Visit this air compressor reviews blog for more. If all this seems very confusing please do not stress everything is revealed in this article.

Finding the perfect air compressor to cope with the type of work you are doing is often a delicate process.

Technological Terms:

Familiarity In all the technical terms of the compressor, it is essential to make your decision to buy a compressor. Despite the fact that a number of types of compressors is usually very large, choosing the right unit can be facilitated by asking some important questions.

Performance Rankings:

Adapting a Pneumatic Tool or Tools Standard cubic feet per minute and PSI needs an air capacity output compressor is important. The average number of cubic feet per minute or SCFM is the amount of air the compressor can produce in one minute. All tools powered by the use of a compressor have a SCFM value; This quantity will indicate the induced air supply for the best functioning of the tool.

Standard Standard Consumption in cubic feet per minute

Air Filter Cleaner: 3

Air hammer, light: 4

Heavy air hammer: 22

Air Hoist, 1000 lbs: 5

Pneumatic motor – 0.5 HP: 6 – 10

Air motor – 1 hp: 12 – 15

The standard consumption of pneumatic tools per cubic foot per minute may vary from one tool to another, some tools only need to use 1 or 2 SCFMs while others require 10 to 14 standard cubic feet per minute.

If you think you have the ability to run multiple tools at the same time, it is clear that you really want more power. In this case, specify the minimum SCFM rate for your compressor by adding the SCFM aggregate specifications for the equipment you are using at the same time. To provide a buffer to the calculations, you must add another fifty percent to the last number. Read air compressor reviews blog now.

Air tool 1 = 2.0 SCFM + Air tool 2 = 1.0 SCFM add them together and the total is 3.0 SCFM, add 50% buffer and we have a total of 4.5 SCFM (standard cubic feet per minute), and therefore trying to find a compressor with a SCFM rating of more than 4.5 SCFM.

The smallest SCFM compressor rating can be determined by adding the SCFM classification with all compressed air tools to be used at the same time. If only one pneumatic tool is switched on, you must go to SCFM with the best-rated pneumatic tool.


Commonly operated compressors are generally operated by a common 110-120V power supply. Although air compressors with an engine over 2 HP can have a 220-240V power supply.

Fuel operators do not rely on electric power to be truly mobile. Although gas compressors have many disadvantages. The most important loss is the fact that the fuel driven by the air compressors produces noxious gases and because it must not flow inside or even any kind of busy workplace.

Decibel Levels of a common compressor:

Sound output is an important factor when buying an air compressor. Air compressors have a list of sounds listed in the manufacturer’s specifications and if you usually make the device inside or in a small workshop you can decide a silent machine instead of dangerous damage to your hearing using the controversial air compressor. So you should know the level of noise before you buy.

Leave A Reply